Gas Analyzer

A gas analyzer is an analytical instrument used to determine the concentration of a known gas in an atmosphere that contains various gases. The typical purpose of a gas analyzer is to improve safety, quality, and efficiency, and to monitor the process and emissions.

New

CEMs (Continuous Emission Monitoring Systems)

New

Continuous Emission Monitoring System in Cabinet

New

Protea’s range of Fourier Transform Infrared (FTIR) Gas Analyzers allows for the measurement of nearly any gas with one instrument. A FTIR gas analyzer collects a full infrared spectrum continuously, allowing for hundreds of gases to be detected and measured at once. Changes are only needed to software calibration files to measure new gases.

New

Chemoluminescence NOx analyzer Ankersmid is your most experienced dealer for various NH3 and NOx analyzers among others Eco Physics and Siemens, service, certification and calibration at omns or on site.

New

NDIR analysers To determine the infrared spectrum of a sample is a fine beam of infrared light shone through the sample. By comparison with a reference beam with the same light intensity is measured how much of the light of each frequency is absorbed by the sample. One thus determines the absorbance of waves having a wavelength of 2.5 micrometers to 17 micrometers (in the infrared spectroscopy it is often expressed as the number of waves per centimeter: 600 cm-1 to 4000 cm-1).

New

The MODEL 1000RS Portable Trace Oxygen Analyzer is the undisputed leader when measuring ppm levels of oxygen in the natural gas industry. Patented innovations and key features are packed into a compact, rugged design. The patented ELIMINATOR CELL BLOCK and sensor technology combination produce an incredibly fast and reliable O2 measurement. The datalogging feature serves as a critical tool when searching for difficult intermittent leaks in the field.

New

The MODEL 2010BX is AMI’s most advanced Trace Oxygen Analyzer. This next generation unit combines patented technologies and superior design to deliver unsurpassed performance and reliability while keeping costs low. The MODEL 2010BX is the #1 choice among engineers and measurement technicians.

New

medium to high dust concentrations for small stack

New

very low to medium dust concentrations One-sided installation

New

low to medium dust content Easy one-sided installation

New

very low to medium dust concentrations

New

For medium to high dust concentrations

New

DUSTHUNTER SP30 Independent measuring device – with or without MCU control unit Automated monitoring of zero and reference point Integrated purge air unit as an option Installation on one side of a duct Rugged and compact structure No moving parts in the duct

New

very low to medium dust concentrations

New

low to medium dust concentrations

New

SO2 and CO2 measurement downstream of the scrubber

New

HF measuring range: 0 ... 3 mg/m³

New

up to 10 IR components plus O2 and TOC HCl and NH3

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ Privacy Policy  and  Cookies Policy